Combi Pack Gas 20mm


Application

High (mains) pressure gas continuous flow hot water systems.

Specifications

Specifications


CP20G includes:
 
Pressure Limiting Stop Valve 20mm (LSV20-500)
  • Compact 4 in 1 Valve – Limiting, Isolation, Non-return and Filter all in one.
  • Stainless Steel Filter 250 micron
  • DR Brass Body
  • Pressure Setting: 500kPa
  • Extremely High Flow rate up to 135 litres/minute

 
20mm Ball Valve - Blue Handle for Water
  • Forged brass ball valve, nickel-plated
  • Aluminium T-handle
  • Thread ends UNI EN 10226 - ISO 228/1
  • Nominal pressure (PN) in bar: 20
  • Temperature range:0.5 °C / +120°C

 
20mm Ball Valve - Yellow Handle for Gas
  • Forged brass ball valve, nickel-plated
  • Yellow aluminium T-handle.
  • Thread ends UNI EN 10226 - ISO 228/1
  • Nominal pressure (PN) in bar: MOP5
  • Temperature range:0.5 °C / +60°C

 
PLUS 1 x MF 20mm, 1 x 20mm Fibre Washer (Gas) and 1 x 20mm Rubber Washer (Water)

Product Codes

CP 20G    Combi Pack Gas 20mm

Installation & Servicing

Installation


INSTALLATION FOR MAINS PRESSURE GAS CONTINUOUS FLOW WATER HEATERS in accordance with NZBC Clause G12 (2001) and NZS 4607:1989. Valves manufactured to NZS 4608:1992.
  • Do NOT install Limiting Stop Valve in the ground
  • Limiting Stop Valve Maximum Temperature: 40°C
  • Maximum Inlet Pressure: 2000 kPa
  • Refer to water heater manufacturer’s installation instructions for installation requirements.


Translate »