Menu

Limiting Stop Valve Hot Commercial 350/500


Application

Protection for High (mains) pressure water systems. Retrofit solution for existing hot or cold systems.

Sales enquiries
Previous Image
Next Image

Features & Benefits

Features and Benefits

  • Non-return and Filter all in one
  • Designed to protect systems running hot water up to 80°C
  • Pressure compensated to give constant outlet pressure regardless of inlet pressure
  • Factory set at 500 kPa outlet pressure (Fully compensated)
  • Machined, assembled, and 100% tested in NZ
  • DR Brass

Specifications

Specifications


LSV20H500C Inlet: 20mm, 3/4” BSP (male) Outlet: 20mm, 3/4” BSP (male) Length: 140mm
  • Maximum inlet pressure 2000 kPa
  • Outlet Pressure 500 kPa
  • Maximum Temperature 80°C
  • Flow Rate 75 litres/minute
  • Integral 60 mesh (250 micron) filter
  • Integral Non-return
LSV 20H350C Inlet: 20mm, 3/4” BSP (male) Outlet: 20mm, 3/4” BSP (male) Length: 140mm
  • Maximum inlet pressure 2000 kPa
  • Outlet Pressure 350 kPa
  • Maximum Temperature 80°C
  • Flow Rate 75 litres/minute
  • Integral 60 mesh (250 micron) filter
  • Integral Non-return
LSV20H500 graph

Product Codes

LSV 20H500C     350kPa limiting stop valve hot LSV 20H350C     500kPa limiting stop valve hot

Standards

Standards


Complies with NZBC Clause G12 (2014) Complies with NZS 4617: 1989



Translate »